Ultrasonic cleaning machine cleaning steps : 1. Refer to the ultrasonic cleaning machine installation manual to connect the temperature control sensor signal line, ultrasonic drive line, heater control line and other lines between the electric control cabinet and the main unit of the cleaning machine, and connect the 380VAC power supply, install the upper water pipe of the cleaning machine, put Water pipe and overflow drain pipe. 2. Ultrasonic cleaning pool Add an appropriate amount of clean water to the cleaning tank. The height of the liquid level shall be the same as the parts to be cleaned, and generally not more than three-quarters of the cleaning tank. 3. Ultrasonic cleaning and heating Start the electronically controlled heating switch and point the white scale line on the water temperature adjustment knob to the appropriate temperature (should be about 60 °C). The maximum temperature of the cleaning agent should not exceed 70 °C during use. 4. Ultrasonic cleaning machine added to cleaning agent When the water temperature rises to about 40 °C, add UC-O3 parts cleaning agent to the cleaning tank (usually about 5kg at a time), and slowly stir the water to dissolve it completely (this can also start the sound wave or turn on the air blowing device). Stir). 5. Ultrasonic cleaning machine pretreatment Before cleaning, it is advisable to use a bamboo knife to first remove the dirt on the surface of the parts (for example, there will be a lot of dust on the outer surface of the dust cover, and the parts of the cylinder block will accumulate a lot of thick and easy-to-remove sludge in the change of the outer casing curve). In order to extend the life of the cleaning fluid. Ultrasonic waves can be precisely cleaned, but their ability to treat dirt from mud is weak. Therefore, yellow mud or muddy dirt should be removed as much as possible during pretreatment. For more information on ultrasonic cleaning machines, please click to view: Ultrasonic cleaning machine In 2007, Shanghai Bayu ( ) Industrial Co., Ltd. established an offline supply system for laboratory instruments, MRO industrial products, etc. In 2009, it officially launched an online procurement operation platform. Pond Monsta ,Pond Monsta Vacuum,Pond Monsta Vacuum Cleaning System,Vacuum Pool Cleaner Ningbo ProWay Optics & Electronics Co., Ltd. , https://www.proway-microtech.com