Due to the influence of low temperature in winter, the tractor's fuel and lubricant can easily form a concentrated viscous or solidified state, which makes it difficult to start the tractor. To facilitate the start of the tractor, some operators use the method of baking the oil tank and the oil pan to warm the body and dilute the fuel and lubricant. As everyone knows, the consequences of doing so will bring great harm to the various parts of the tractor. 1. If the appearance of the tractor is roasted and smoked, the paint on the surface can be burnt off, causing rust in the peeled part of the paint. The smoke traces of the unburned patent leather after being roasted and smoked are also difficult to remove, seriously affecting the appearance of the tractor. 2. The plastic tubing and components that are baked by fire tend to be stiff and brittle, causing deformation, breakage, or oil leakage. V-belt, wire and parts of rubber parts, paper pads and other parts may also be due to baking aging, deformation or damage. 3. Soldering of solder for metal oil (water) pipes can also be heated rapidly due to baking, resulting in leakage or burst of solder leakage leakage. 4. Use low-grade diesel or unqualified diesel, easy to solidify in the tank (tube). If you bake the tank with fire, it can easily make the tank explode. 5. Inflammable diesel oil, engine oil, and plastics, rubber, and other parts throughout the tractor are flammable. Once a fire is triggered, the consequences are heavy. Therefore, in order to facilitate the winter start of the tractor, the following measures should be taken: High-grade (such as -10 or more diesel oil) diesel oil that does not easily solidify should be used; the tractor should have warmth keeping measures; hot water should be added for preheating before starting; check before wintering Engine oil, if replacement is required, replace the winter diesel engine oil. Before replacement, the engine oil of the oil pan should be discharged before heating.
Pain Relief Patch for Breast
Pain Relief Patch For Breast,Pain Relief Plaster For Breast,Relief For Breast Pain,Pad Relief Patch For Breast Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xjplaster.com
[Name] Medical Cold Patch
[Package Dimension] 10 round pieces
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for breast hyperplasia, breast fibroids, mastitis, breast agglomera tion, swollen pain.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.