Size
Because of different growing environment and conditions of itself, the fruit will be different types of shapes and sizes, usually we deliver the size 220/280/320/350 and so on, but can also supply other sizes.
280Grains/50G Goji Berry,Mechanical Dried Wolfberry,Organic Certificated Wolfberry,Organic Wolfberry NINGXIA HONG RISING BIOLOGICAL TECHNOLOGY CO.,LTD. , http://www.hongrisinggoji.com
New tractor uses "four notes"
Prior to use, the new tractor should do the following five aspects of work, which is an important measure to ensure the normal operation of the tractor and prolong its service life. The tightening of the connecting parts of the tractors is factory-tested, but during the repeated transfer process, the machine is inevitably loosened. For this purpose, various fasteners and fasteners should be tightened in time, especially the steering system, brake system, suspension, and wheels. Checking the liquid level is mainly the fuel tank oil level, water tank surface, transmission and rear axle lubricant oil level, and the battery electrolyte level. When it is found that the liquid level is insufficient, the liquid material should be added in time. Check the oil should mainly check the following: The amount of oil in the sump should not be less than the underline of the oil ruler; for example, the tractor is shipped from the factory in summer, and bought back in winter. Should be replaced with oil for winter use, and vice versa; the switches for oil filters on large tractors should be switched to the "summer" or "winter" position depending on the season or the temperature; some manufacturers may avoid oil baths. The oil in the oil filter of the air filter spilled out to pollute the vehicle during transportation, and was not added at the factory. Pay attention to adding oil after buying it. Run-in is to make the new machine's rotation speed from low to high, load from small to large, through the gradual operation process, the gear, shaft and other friction surface grinding marks become more seamless. Running-in has an important effect on prolonging the service life of the parts. Do not neglect the running-in process and neglect the running-in process. Otherwise, the machine will be damaged due to minor loss.