Flavone Series,Flavone Intermediate,Flavone Api,Di-Substituted Flavones Shandong Bolode Bio-technology Co., Ltd. , https://www.bldpharma.com
After filling in the loading area, the machine's mechanism folds the ears into the left and right guide rails and then performs the closing operation. The front mechanism of the cover will first bend the tongue of the paper box, and then a push plate pushes the cover to bend, so that the tongue is inserted into the box and locked. The capping action is a critical action, and the quality of the carton has a lot to do with the structure of the carton and the accuracy of the machine adjustment.
The current prevailing problems of the cartoning machine (1) The speed of the machine is limited by the speed of the following instructions and the lower medicine plate, and the design should be more reasonable; (2) The stability of the machine is relatively poor after long-time high-speed operation, requiring stable operation and using servo (3) After long-term operation, the accuracy is not up to the requirement, the synchronization is not good, and the reliability is required to be improved; (4) the adaptability to the product is low, the function is relatively simple, the adaptation surface is relatively narrow, and the drug to be loaded is There are strict regulations on shape and volume, etc.; (5) equipment operation reliability is not high, and frequent maintenance is required to affect production progress; (6) production efficiency is not high, running speed is slow, and automation is not high; (7) cartoning machine It is sensitive to the dimensional deviation of the specification. For example, the dimensional deviation of the specification should be less than ±0.5mm. In the daily production, the phenomenon of the card machine will be thin because of the thinner specification. Sometimes the carton is not easily opened or the card is stuck because of a slight change in the size of the carton.
Automatic cartoning machine working principle and existing problems
The automatic cartoner feed is generally divided into three inlets: the instruction inlet, the vial inlet and the machine box inlet. The whole process of packaging and forming from the package box to the zui can be roughly divided into four stages: lower box, open, filled, and closed. The lower box action usually involves a suction cup sucking a paper cassette from the paper tray feed port, descending to the main line of the loading box, fixing the paper cassette by a rail card position and opening the paper cassette with a push plate, and there are two The card that moves forward moves up from below, jamming the side of the carton from the front and rear, opening the box at right angles and moving forward to the loading area.