Oil, or engine oil, is known as the “blood†of a vehicle and can act as a lubricant, clean, cool, seal, and reduce wear on the engine. If the engine oil is used or mixed, it will aggravate the engine wear caused by wear or damage. Therefore, we should pay attention to the following points when using oil: 1. Do not mix new engine oil with old engine oil. After the old and new oils are mixed, it will accelerate the oxidative deterioration of the new oil, which will reduce the use of new oil and the use of time. 2. Do not mix diesel oil or gear oil in the oil. Adding diesel oil or gear oil to the oil will damage the additives in the oil, causing the oil to deteriorate quickly, and aggravate the wear of the friction parts. 3, hydraulic oil can not be used instead of oil. The use of hydraulic oil as the engine oil creates a paint film in the combustion chamber that is not easy to remove and will exacerbate wear after replacement. 4. Oil must not be mixed with oil or diesel oil. Adding oil or diesel to the lubricating oil can easily cause loss of grease and reduce the use of grease. 5. Do not use engine oil instead of gear oil. After replacing gear oil with engine oil, the drive train gear is not easy to hang with oil film, which will cause early wear of the transmission pair. 6. Do not use engine oil instead of brake fluid. The use of oil instead of brake fluid will cause the brake system's rubber parts to expand, causing brake failure. 7. Do not use gasoline engine oil instead of diesel engine oil. Otherwise, the engine oil is easily oxidized and deteriorated, and it also causes damage to diesel engine bearings that are not resistant to corrosion. Chlorine Meter,Portable Chlorine Meter,Smart Chlorine Meter,Performance Chlorine Meter INESA Scientific Instrument Co., Ltd , https://www.inesarex.com