Medical disposable non-woven protective gown clothing use: medical protective gown ,Isolation gown has excellent moisture permeability and barrier property, can effectively resist alcohol, blood, body fluids, air dust particles, bacteria, penetration, safe and convenient to use, can effectively protect the wearer from infection threat, wearing comfortable, feel is good, strong tensile resistance, waterproof breathable, no cross infection, etc.
Product structure:
1. Protective gown is a one-piece structure composed of hat, jacket and trousers.
2. Reasonable structure, easy to wear and tight joint.
3. Elastic elastic band is applied to the cuff, ankle mouth and cap face.
Function of SFS material: it is a composite product of breathable film and spunbonded cloth, which is breathable and waterproof.SFS (hot melt adhesive composite) : various film and non-woven composite products.
Disposable protective clothing, Isolation clothing, surgical clothing, Isolation gown, Medical Protective Gown Hebei Orient Imp. & Exp. Co. Ltd. , https://www.orientmedcare.com
Human cadherin E (Cadherin E) ELISA kit instruction manual
Human cadherin E (Cadherin E) ELISA kit
 ( for serum, plasma, cell culture supernatant and urine, saliva biological fluid )
principle
This experiment used double antibody sandwich ABC-ELISA. Coated with anti-human Cadherin E monoclonal antibody on the microtiter plate, Cadherin E in the standard and sample was combined with monoclonal antibody, biotinylated anti-human Cadherin E was added to form an immune complex attached to the plate, horseradish The oxide-labeled Streptavidin is combined with biotin, and the substrate working solution is blue. Finally, the stop solution sulfuric acid is added, and the OD value is measured at 450 nm. The concentration of Cadherin E is directly proportional to the OD value, and the specimen can be obtained by drawing a standard curve. The concentration of Cadherin E.
Kit composition ( 2-8 ° C preservation)
Coated Wells
96 holes
Enzyme Conjugate
12ml
10× specimen dilution (Sample Buffer)
12ml
20×Wash Buffer
50ml
Standards: 10ng/bottle
2 bottles
Substrate working fluid (TMB Solution)
12ml
Primary antibody working solution (Biotinylated Antibody)
12ml
Stop Solution
12ml
Prepare reagents and collect blood samples
1. Collection of specimens: serum, plasma (heparin anticoagulation), cell culture supernatant, urine, saliva, etc., as soon as possible, stored at 2-8 ° C for 48 hours; longer time must be frozen (-20 ° C or -70 ° C) Save to avoid repeated freezing and thawing. With sample dilution is at least 1 serum or plasma assay: 50 dilution (take 20ul, sample plus diluent 980ul, diluted 50-fold).
2. Standard solution preparation: Add 0.5 ml of distilled water before use and mix to prepare a 20 ng/ml solution. Set 8 tubes of standard Tube, and add 200 ul of standard dilution solution to each tube. Add 20 ng of standard solution of 20 ng/ml to the first tube, mix and aspirate 200 ul with a pipette, and transfer to the second tube. Repeat the dilution as described above, and aspirate 200 ul from the seventh tube and discard it. The eighth tube is a blank control.
3. The 10× specimen dilution was diluted 1:10 with distilled water (example: 1 ml concentrated dilution + 9 ml distilled water).
4. Washing solution: diluted 1:20 with distilled water (example: 1 ml concentrated washing solution added to 19 ml of distilled water)
Test procedure
1. Loading: Add 100 ul of standard or sample to be tested in each well. Mix the reaction plate thoroughly and let it stand at 37 °C for 120 minutes.
2. Wash the plate: Wash the plate thoroughly with washing solution 4-6 times, and dry it on the filter paper.
3. Add 100 ul of the first antibody working solution to each well. The reaction plate was thoroughly mixed and placed at 37 ° C for 60 minutes.
4. Wash the board: the same as before.
5. Add 100 ul of enzyme-labeled antibody working solution per well. The reaction plate was placed at 37 ° C for 30 minutes.
6. Wash the board: same as before.
7. Add 100 ul of substrate working solution to each well and let it react at 37 ° C for 15 minutes in the dark.
8. Add 100 ul of stop solution to each well and mix.
9. Measure the absorbance at 450 nm using a microplate reader within 30 minutes.
Result calculation and judgment
1. All OD values ​​should be subtracted from the blank value before calculation.
2. Using standard products 10, 5, 2.5, 1.25, 0.625, 0.312, 0.156, 0 pg/ml as the abscissa and OD as the ordinate, plot on the coordinate paper and draw a standard curve.
3. Find the corresponding Cadherin E content on the graph based on the OD value of the sample, and multiply by the dilution factor.
Kit performance
1. Sensitivity: The minimum concentration of Cadherin E is less than 0.1 ng/ml.
2. Specificity: Recombinant or natural human Cadherin E can be detected simultaneously. Does not cross-react with other human cytokines.
3. Repeatability: The coefficient of variation in both the plate and the plate is less than 10%.
Precautions
1. It is recommended to make double holes for the above standard holes and samples to be tested. The standard curve should be made at the same time for each measurement.
2. The washing process is critical. Insufficient washing will result in an accuracy error and an erroneous rise in the OD value.
3. After the slats are opened, the remaining slats should be sealed again to keep the slats dry .
4. This kit should be stored in a 4oC refrigerator.
5. This kit is for scientific research only and cannot be used for clinical diagnosis!