Cpe Disposable Gloves,Plastic Protective Gloves,Pro Safe Disposable Gloves,Hospital Disposable Gloves Shandong Haoyue Medical Technology Co., Ltd , https://www.haoyueyiliao.com
Whether the hopper has not been expected, if it is: need to hurry to feed is not: please check whether the hoist control contactor is in the power state, if it is in the power state, quickly check whether the motor is in power and load state, because this situation It is very likely that the preform is caught by the preform (embryo), and the simple method of Zui is to help the lift manually.
If the control contactor of the hoist is not in the power-on state, check that the preform detects that the electric eye is not in the same line as the reflector.
2 feeding old card feeding tray: This situation is a headache problem. From the experience point of view, if the length of the preform (embryo) is relatively long and the weight is relatively large, then this phenomenon is relatively small.
3 After the bottle is blown, it cannot be taken out of the mold.
First, the mold should be opened, and the mold should be opened and closed manually. If it is normal, run it in the empty running state, if it is normal.
Please check your exhaust time setting. If the exhaust setting is normal and it will fail every time you blow a bottle, you can judge the problem of the exhaust valve. Please open the exhaust valve to check the spring and seal. There is also a phenomenon in which the exhaust sound is relatively loud or has a bad sound.
If you are experiencing a lot of mold production and occasionally come over this kind of mold can not open the mold, please check whether the lock pin has a segment of the screw inside, in addition, please check whether the clamping force is too large, if it is too large, you should follow Standard re-adjustment.
4 The bottle is always misplaced by the position of the gripper.
5 The collision of two robots requires a manual reset of the robot, which is caused by misalignment.
How to maintain and maintain the blow molding machine
1 Feeding level is not added: several cases need to be checked: