How to extend the service life of the harvester rubber track?
To extend the service life of the rubber track of the combine harvester, the following three tasks should be used, adjusted, and maintained: 1. The use of tracks should be careful. 1. Do not make sharp turns on concrete floors, gravel roads or hard roads so as not to accelerate crawler wear and cause the belt body to twist or crack. 2. Try not to work on excessively bad blocks so as to avoid track slippage, affect normal operation and increase track wear. 3. When stones or foreign objects enter the gap between the track and the underframe, they should immediately stop and remove the stones or foreign objects. Second, the tightness of the track should be adjusted properly. The tracks are too tight, the power loss of the combine harvester is large, the track wear is aggravated, the crawler pitch is widened, and the belt body cracks easily, affecting the service life of the crawler belt; the crawler belt is too loose, and when the combine harvester is walking, gear hopping and steering failure occur. Defects such as track derailment affect the normal operation of the combine harvester. It must be adjusted according to the specifications of the combine harvester. Third, track maintenance should be timely. 1. Rinse the track promptly after working on the beach or in fields where chemicals are spilled. 2, at any time to clear the track on the mud, stones and debris. 3, to avoid crawling with oil, solvents, salts and other objects, such as sticking should be cleaned. 4. Always check the operating conditions of various auxiliary parts in the crawler belts. Replace them with serious wear. 5. When the caterpillar is stored for a long time, dirt and debris on the caterpillar should be washed away and stored overhead.