The production of piggery fermentation beds also has certain requirements for the thickness of the fermentation bed. There were many users who had consulted the problem of padding thickness in piggery beds, because some brands had only 20-30cm thickness needed to make fermented mattresses when they were advertised. Why is the thickness of the padding for pigs used in Jinbao dry-type fermentation beds? 50cm, which will virtually increase the cost of breeding, because the litter is also to spend money to buy. For such problems, let me explain to you all the doubts. Bottom: Fermentation Bed Bacteria Spraying Many users use individual brands of fermentation bed products. The litter only needs 20-30cm. The sensory effect is also acceptable. The feces is not normally visible. In fact, the feces are not completely decomposed, but they are buried and can be effective in a short time. The excreta will cause corrosion to the litter, resulting in a high mat consumption rate, and the frequency of dunnage replacement will increase. This will increase the cost of farming without a line, and ultimately will not achieve zero emissions.
Chemical Intermediates introduction
daily chemicals,Agrochemical Intermediates,Dyestuff Intermediates ,Syntheses Material Intermediates ,Flavor & Fragrance Intermediates,Pharmaceutical Intermediates,Gridine disodium GTP-Na2, Famotidine Powder, Carbomer 940
Some of the product list
Gridine disodium GTP-Na2, Famotidine Powder, Carbomer 940 , Prasterone /Dehydroepiandrosterone,
Chemical Intermediates,daily chemicals,Agrochemical Intermediates,Dyestuff Intermediates ,Syntheses Material Intermediates ,Flavor & Fragrance Intermediates,Pharmaceutical Intermediates,Gridine disodium GTP-Na2, Famotidine Powder, Carbomer 940 Xi'an Jmlai Bio-Tech Co., Ltd. , https://www.jmlaisarms.com
Beijing Jinxia Kangyuan Science and Technology Co., Ltd. has developed a golden spit dry-sweeping fermentation bed strain that can achieve the effects of eliminating excrement and zero-emission. It requires one dose and one material, which is the starter and padding. The litter requires pigs to be 50cm, which is well-founded and is a scientific use standard. Because the decomposition of feces using a fermentation bed is not primarily dependent on separate fermentation broth species, it is mainly due to the temperature generated during the decomposition of the feces by the bacteria species. The composition of the feces is 95% moisture, and only 5% are solid materials. The strain produces a lot of temperature by decomposing the feces. The 50cm padding, the middle layer can accumulate a temperature of 45-55°C, and this temperature can put the feces in The moisture evaporates, and the solid material is mixed with the padding to form organic fertilizers and bacterial proteins to complete the decomposition of the excreta and achieve zero emissions without odor. In other words, the thickness of litter can only be higher than 50cm and cannot be lower than 50cm. If it is lower than 50cm, it cannot accumulate heat, and decomposition of feces cannot be achieved.
We use long-term fertility fermentation beds, which we pursue for long periods of time. If properly maintained, we can recycle more than five years. In fact, the overall cost is not high.
Therefore, it is recommended that you choose a big brand when choosing a brand. You can rely on it, have a good reputation, and have a guarantee. This will ensure long-term benefits. Fermenting bed pigs, the thickness of bedding can not be less than 50CM, if someone tells you to do fermentation bed only need twenty or thirty centimeters thickness of litter, you have to consider carefully, so as not to be deceived, suffered losses. For details, please contact: Beijing Huaxia Kangyuan Technology Co., Ltd. Telephone Toll Free Hotline:
Recommended reading:
What are the disadvantages of pigs on the cement floor?
Http://?id=300&classid=153
Fermenting pigs in summer will be hot?
Http://?id=299&classid=153
Oleic Acid Amide/Oleamide,Surfactant Sodium Carboxymethyl Cellulose CMC,Diflubenzuron Insecticide,Titanium Dioxide Nanoparticle,
Company Profile
Xi'an Jmlai Bio-Tech Co.,Ltd is Research, Production, Process and Sales. company mainly engaged in export of products including,without limitation, pharmaceutical raw materials both for vet and human, also Vitamins, Amino Acids, minerals, peptides,plantextract, feed and food additives. and provide natural and well-qualified raw materials to the companies being engaged in pharmaceutical,health product, nutritional product, cosmetic raw material,Sarms Products , Steroids Products Peptides Products, APIProducts, Plant Extract and HGH, HCG. with very strong strength in R&D, production, sale and other aspects in the national plant extract industry.