Drainage and irrigation equipment after maintenance technology

After the drainage equipment has been disabled, if it is poorly maintained and managed, it is easily damaged by rust and cannot be used. Therefore, after the drainage equipment is deactivated, it must be properly maintained and managed. ?
1. After the diesel engine is decommissioned, perform a thorough inspection and repair of each site to keep it in good condition and then apply the lubricant. For parts of the body that are stripped of paint, paint should be re-painted to prevent rust. After checking and repairing, it should be elevated in the room and stored off the floor.
2. The motor used in the well shall be dismantled from the well and used for inspection and maintenance in the room after decommissioning. First wipe the dirt on the shell, and then carefully check the maintenance of the movement, and then storage. Motors and starters should be protected against dust, moisture, and rain. After packing, store it in a safe place.
3. Centrifugal pumps should be used to withdraw the pumps and hoses from the machine wells. After putting clean water, check the wear of the pump impeller, bearings, cups, etc., and replace worn parts. The bearings should be cleaned with gasoline, greased with butter, and well-assembled. The rust on the iron valves of the bottom valves and elbows of the pumps should be brushed clean with a wire brush, and painted in a dry warehouse. Store off the ground.
4. Deep well pump. After being deactivated, it should be started every 7-10 days. The time is generally about 30 minutes to prevent rust in the rotating part. If the decommissioning takes a long time, the pump must be taken out of the well and put into storage after inspection.
5. After the tubes are deactivated, the water must be drained. Iron pipes should be painted; glue pipes should not be in contact with gasoline; plastic pipes should also be washed and placed in a dry warehouse for proper storage.

Adult Care Diaper

We could supply Adult Diaper with three kinds, it includes adult diaper with sticker, straight inner diaper and Calabash insert diaperThe features are: 1)Top sheet with Non woven ,make you feel very comfortable. 

2)PE tape allows easy use and refastening as many times as necessary 

3)Printing PE film Back sheet.

4)Leak guard can better advoid leaking.

5)Imported Pulp and SAP can absorbs fluid instantly

6)OEM available  


We have three kinds of adult diaper:

1) diaper with sticker

2) straight inner diaper

3) Calabash diaper



3.Payment & Samples:

Payment: T/T 30% in advance, 70% upon the receipt of BL copy.

Delivery Date: within 30 days.

Delivery Place: Xiamen port,China

Samples: Free,customer pays the postage.

4.Company Information:

we are a leading company in hygiene industry,our main line is baby diaper,adult diaper,our products have 

been sold to many countries and received high popularity worldwide,we do business on the base of mutual benefit. 

5.Certificates and advantages:

1) OEM from 1998

2) Certificate: ISO9001

3) Imported fluff pulp and SAP 

4) 100% quality guarantee 

 

Product show:


 Adult Care






Adult Diaper

Adult Diaper,Adult Disposable Diaper,Adult Diaper Calabash Shape,Adult Insert Pad

Tianjin Jiao rou Sanitary product company , http://www.tjsanitary.com