Milk Cooling Tank / milk chilling machine for dairy farm
Introduction of Leo milk cooling tank / milk chiller:
Milk cooling tank composed of refrigeration units and tank body as two major parts. Tank body made of high quality AISI stainless steel (food grade); insulation layer use polyurethane foam one time forming; compressor unit using the most advanced U.S. Copeland flexible scroll compressor; optional device including automatic cleaning devices, electronic metering device and heat recovery system; independent computer control system makes our milk cooling tank in intelligent automatic working condition. Our milk cooling tank features are:quick cooling speed, high efficiency and insulation ability , low noise, reliable, simple operation, no maintenance and on-site installation, long service life. Capacity from 500L to 12000L to meet the different needs of various customer groups.
Features and benefits of Leo milk cooling tank/ milk chiller :
Milk Cooling Tank Milk Cooling Tank,Cow Milk Cooling Tank,Horizontal Milk Cooling Tanks,Farm Milk Cooling Tank Henan Leo Husbandry Equipment Science and Technology Co.ltd , https://www.chinaleodairy.com
(1) Stocking Density When the juvenile weight in the greenhouse grows to more than 10 grams, it enters the rearing stage of the juvenile, and the stocking density at this time can refer to the table.
Table Winter Greenhouse Cub Density Density Monthly Average Body Rehabilitation Quantity Stocking Weight Dianchi Water Depth
(g) (only/square meter) (kg/m2) (cm)
10 10 70 0.7 10—15
11 22 65 1.4 10—15
12 35 60 2.1 15—20
1 48 55 2.6 15-20
2 75 40 3.0 20-25
3 100 35 3.5 25-35
4 150 30 45 35-45
5 200 25 50 45-55
6 250 20 50 55—70
(2) The requirements for feeding nutrients and feeding techniques for feed calves and pupas are not as strict as those for juveniles, but as the individuals grow up, the food intake continues to increase. Therefore, the choice of feed quality and the feeding technology Requirements still cannot be taken lightly.
Feeding technology still adheres to the "four principles" principle. The juvenile and quail species should use high-quality larvae and quail species (or quail) compound feeds. There are still two kinds of processing methods before feeding, but the particle size of soft granules can be increased by 3.0-3.5 mm. 5 mm; when the mass of feed is processed, it may be mixed with some vegetable juice to increase the amount of vitamins. The total amount of daily feeding increased with the increase of body weight, but the daily feeding rate was reduced accordingly. Their feeding rates were divided into three levels: 11-50 grams, 51-150 grams, and 150-250 grams. Their daily feed rates were 3.0%-3.5, 2.5%-3.0%, and 2.0%-2.5 respectively. %, and according to their weight gain, at least once every 10 days to adjust the amount of feeding, after each feeding required to eat within 3-4 hours.
(3) The day-to-day management of pups and puppies is similar to that of childbirth management. The following steps should be taken.
1 temperature control, control wet temperature control at 30 °C, room temperature to maintain 32-33 °C. Because the earthworm is an animal breathing on the lungs, the humidity in the indoor air should not be too large, and the general humidity should be maintained at 65-75%. If the humidity is above 90%, the amount of food consumed by the cockroach decreases and the disease increases.
2 Control of Water Level and Water Quality As the individual grows, the water depth in Dianchi Lake increases accordingly. The important task of raising grasshoppers in greenhouses is to control the water quality. High-protein residual baits and earthworm excrement are decomposed at a high temperature of 30° C. and perishable spoilage, causing the bottom sand to become black and the pool water to stink, affecting growth. Currently, the measures taken are: Inflate, increase dissolved oxygen in water, help to accelerate the decomposition of organic matter, improve water quality; use siphon to suck sewage or sewage pipe to discharge sewage after daily intake; add more water and change water.
3 Prevention of diseases The main diseases in the breeding process of pups and fleas include skin perforation, red soleplate disease, male precocious puberty, and genital extension. For the prevention and control methods, please refer to the section “Caries prevention and treatmentâ€.
Cultivating management skills for pups and clams
The cub is a small oyster raised to about 150 grams with about 10 grams of body weight. The quail species is a large-sized species that weighs about 150 grams and weighs less than 400 grams. This is a very important stage in raising pupa production. It directly affects the future breeding of pupa. Rapid breeding and production of pups and clams are conducted in greenhouses in the winter and spring cold seasons. The following steps must be mastered.