1. The engine water temperature should be maintained at 85 - 95 °C. This section has the highest thermal and thermal efficiency and consumes the least amount of fuel. Plasma Products,Anti-Hbs,Safe Plasma,Safe Plasma Storage Sichuan Yuanda Shuyang Pharmaceutical Co., Ltd. , http://www.syimmunoglobulin.com
2. Avoid idling or idle rotation of the engine. If you park for more than 5 minutes, you should stop.
3. Try to work at full load. If the load is insufficient, high-grade small throttles should be used. Avoid overloading operations.
4. Do not arbitrarily lengthen or change the direction of the exhaust pipe so as not to increase the exhaust resistance.
5. Stop the fuel drip, test the fuel consumption regularly on the engine, and install the oil corrector. Oil brakes, oil return pipes, etc. can also be used.
6. Conduct a thorough inspection and maintenance before the operation to prevent sick operation. The wheels of the agricultural machinery shall act on the sheaves that are in line with the V-belt to avoid slippage and fuel consumption.
7. Reasonably select working positions so that the fuel is always in full combustion. Throttle should be selected for economic work position, so that the engine does not emit black smoke. If the engine emits black smoke, the gear should be lowered appropriately.
8. Grasp the technical essentials of clutch shifting with two feet and avoid parking shifts. Do not suddenly increase or decrease the throttle during driving.
9. When driving, use as little braking as possible to reduce power consumption. To properly select the traction load, neither overload, nor "big horse-drawn cars," and not empty cars.
10. To maintain a high tire pressure, the inflation pressure of the tire should be 1-1.5 kg/cm2 higher than the specified value, but do not exceed the maximum pressure.
11. Select the right tire pressure and size. The air pressure of the Dongfeng-12 type hand tow should be 1.6 kg-2 kg/cm2. It is best to choose a drive tire with a tire section width greater than the height.
12. The oil should be added close to the height of the dipstick, but do not exceed the mark.
13. Always maintain the air filter. Do not cover the air filter with cloth or debris.
14. Correctly adjust the fit clearance of each rotating part and the fit of the traction machine is clearance and traction clearance.
15. After the new machine or overhaul, it should be tested according to the regulations. Correct use of lubricating oil, winter and summer should be replaced with different viscosity lubricating oil.