First, the working principle: The dry and wet rice mill consists of a crushing machine (chassis, machine door, motor, spindle, screen, chainring), cyclone separator, feeder, air filter, dust box and induced draft fan. The dry and wet rice mill utilizes the relatively high speed operation between the movable sprocket and the fixed spur, so that the pulverized material is pulverized by the impact of the spur, the friction and the collision of the materials with each other. The pulverized material can be directly discharged from the grinding chamber, and the particle size is determined by changing the mesh of different meshes. The machine runs smoothly, and the pulverized material is fast and uniform, and the effect is good. The whole machine is made of SUS304 stainless steel material, and the dry and wet rice mill is designed according to GMP standards. The production process is free of dust and flying. The main unit is water cooled. 1. Check that the components are strong enough before each use. 2, change the screen, rinse the crusher should pay attention to avoid water into the motor, electrical appliances and bearings, so as not to affect the service life, always pay attention to keep the grinder clean. 3. In order to prolong the service life of the bearing, grease should be added in time, and the 7019-1 lithium grease should be lubricated. 4. The whole machine is inspected once every six months. Note: Do not crush metal, extremely strong and high viscosity materials. model WF-350 WF-450 WF-550 Production capacity (kg/h) 100-300 200-500 300-800 Feed particle size (mm) ≤20 ≤20 ≤20 Crushing fineness 40-120 40-120 40-120 Crushing motor (kw) 11 15 twenty two Vacuum motor (kw) 4 4 5.5 Discharge motor (kw) 0.75 0.75 0.75 Dimensions (length × width × height) (mm) 1400×1200×2100 2100×1400×2300 6000×1600×2450 model WF-650 WF-750 WF-850 Production capacity (kg/h) 500-1200 600-1500 800-2000 Feed particle size (mm) ≤20 ≤20 ≤20 Crushing fineness 40-120 40-120 40-120 Crushing motor (kw) twenty two 30 37 Vacuum motor (kw) 5.5 7.5 7.5-11 Discharge motor (kw) 0.75 0.75 0.75 Dimensions (length × width × height) (mm) 7200×1600×2750 7300×1600×2750 8000×1600×3050
Second, maintenance and maintenance:
Third, technical parameters