How to reuse sprayer
Ordinary sprayer: 1) The handle does not work. When the stem pressure is compressed, if the pump is running water or not working, the cup is often shrinking, hardening or damaged, so you should remove the oil or replace the new one. 2) Poor atomization. When the spray breaks, water vapor sprays out. The reason is that the outlet pipe in the barrel is welded and removed, and it can be removed by soldering. If the spray mist shape is not conical, the reason is that the spray hole is blocked, the nozzle hole is not round, and the debris in the spray head can be removed and the spray head piece can be replaced. 3) Water leakage from multiple sides; water leakage from the spray bar, which is caused by welding or cracks at the weld joints, should be repaired or replaced; water leaks at each joint, and the threads can be tightened or the gasket can be submerged. If the switch leaks, the switch cap is loose; if the seal ring is damaged and the switch core sticks, it can be tightened, replaced, cleaned, and refueled. Mist: 1) It is difficult to start. The floater chamber is not smooth due to the machinery being left unused for a long time and should be cleaned before use to ensure smooth oil passage. 2) Stop after starting. Most of the reasons are that the platinum contacts of the ignition system are loose, stained or ablated. Zero large sandpaper or even a concise knife can be used to wipe the surface of the platinum surface and clean the platinum gap. 3) Insufficient cylinder pressure. Due to greater wear. Replaceable with new piston rings, pistons or cylinders.