The horizontal pneumatic paste filling machine uses compressed air as the power, and is composed of precision pneumatic components to form an automatic filling system. The structure is simple, the action is sensitive and reliable, and the adjustment is convenient. How to operate and maintain: 1. Leakage of the lower part of the cylinder indicates that the piston seal is worn and the seal is required to be replaced. 2, the machine filling action is divided into automatic and manual two, when the height of the machine is manual when using manual, only need to use the bottle mouth to push the contact tongue, that is, start to suck attention, do not against the tongue when filling. When automatic is used, the bottle must be placed under the discharge port. When the transfer switch is turned on, the filling will start immediately and the bottle will be replaced in time. 3. When it is found that the metering is unstable during filling, it should be checked that the feed check valve may be caught by debris, resulting in a tight seal and affecting the filling amount. Detailed introduction:
1. It is suitable for the quantitative filling of liquids, pastes, sauces, granules and other substances in the chemical, food, daily chemical, pharmaceutical, pesticide, lubricating oil and other industries.
2. The cylinder block, casing and hopper of this type of filling machine are made of stainless steel. The piston is made of PTFE material. The pneumatic parts are imported pneumatic components, which meet the requirements of GMP.
3, filling volume and filling speed can be adjusted arbitrarily, foot switch and automatic filling function, high precision, simple structure and convenient operation.