Thoracic Surgery Sternum Saw Drill

Model NO.: 2106
Output Power: Over 90W
Oscillations (Osc/Min): 0-15000
Operation(V) Voltage: 14.4
Sterilization: 135°c
Noise(dB): Below 70
Trademark: EndoTop
Transport Package: Carton
Specification: SGS
Origin: China
HS Code: 9018903000
Thoracic Surgery Sternum Saw Drill

Specifications

For thoracic surgery sternum saw attanchment
1. Handpiece can drive a variety quick connects.



For thoracic surgery sternum saw attanchment


Application:
For application in thoracic surgery.
With the perfect shape of ergonomic design, whole unit is autoclavable, motor is imported, low noise, steadily and quickly cutting, no damage for soft tissue, long service life, be warranty for 1 year.
Notes:
1. Sterilize temperature ≤ 135 ° C (Improved type ≤ 155 ° C ), if the temperature is over 135 ° C, the motor will be damaged.
2. Normal bone drill can only hold drill bits less than 6mm, acetabulum reaming drill with big torque, rpm is around 300, canulate drill is used with nail or K wire, rpm is around 600.
3. The battery need to be get out of the pwer tool after surgery. Otherwise the small automatic discharge of the electric will make the life of the battery short.
4. The battery cannot be sterilized, it is not autoclavable.
5. The cranial bur must be washed right after the surgery by purger in order to aviodthe blood stick in the bur, then we should make it dry.
6. The battery space in the handpiece of the tool should not have any water, after sterilization.
7. The cranial bur blade is made of medical stainless steel, in order to avoid broken, so it is flexible and not very hard, it is easy to be attrite, we suggest each blade only use for 1 surgery.
Output power ≥90w
Speed(r.p.m)  /
Oscillations (osc/min)  0-15000
Torque(Nm) /
Operation(V) voltage 14.4
Sterilization 135°C
Swings (°)  /
Noise(db)  ≤70