China-Pulp-Tester-for-Teeth-Apex-PT-2-

October 12, 2018

PT-2 pulp testor is designed for testing whether the teeth nerve is alive or dead.

Feature:
1, preset speed mode(high-MID-low speed)a gentle, pulsed stimulus begins to increase at a rate
2, specifically designed for patient's comfort, it the patient indicates perception, simply release the button, the stimulus stops immediately, but the numbers remain frozen on the face for about 3 minutes
3, convernient to opearte:
Maximum stimulus: 0-80, between 0-40, the patient feels ache and anesthesia, alive teeth nerve;
Between 40-80, with above-mentioned reaction, dead teeth nerve
4, the device will turn itself off in 3 minutes after operation to save enery
5, battery-operated, standard 9 volt batteries, extremely economical
6, fully guaranteed for 2 years

Technical:
1, Input: DC9.0V
2, OUTPUT: 80V
3, CURRENT: 90mA
4, VOLTAGE RANGE: DC 6.0-10.0V
5, SIZE: 186*38*24mm.

CE approved dental equipments:

endodontic treatment
ET-1
Feature:
1,original switzerland motor
2,color wider LCD screen
3,Drive 1:1 contra angle is available
4,rotation speed and torque can be programmed to 9 settings
5,auto torque reverse
6,dural-frequency apical locator
7,9 working modules
8,auto apical reverse and apical stop
9,auto apical slow down
10,auto start and stop
11,high capacity Li-ion chargeable battery and can work with cattery or adaptor
12,auto powder off and memory function
Technical:
1,adaptor working voltage:AC 100-240V,50-60Hz;
2,5 setting for adjustable rotation speed,range from 125 to 625 rpm
3,adjustable torque,range:6-52mNm

 
endodontic treatment
ET-2
Feature:
1,original switzerland motor
2,drive 1:1 contra angle is available
3,auto reverse to protect the file
4,power by Li-ion chargeable battery or adaptor
5,auto power off and memory function
6,folding LCD screen
Technical:
1,adaptor working voltage:AC100-240V50-60Hz
2,speed ranging from 125 to 625 rpm
3,torque range:6-52mNm

 
endodontic treatment
ET-3
Feature:
1,original switzerland motor
2,5 setting for adjustable rotational speed ranging from  125 to 625 rpm
3,Drive 1:1 contra angle is available
4,auto reverse to protect the file
5,easy operating with wide LCD screen
6,high capacity Li-ion chargeable battery and can work with cattery or adaptor
7,auto powder off and memory function
Technical:
1,adaptor working voltage:AC 100-240V,50-60Hz;
2,5 setting for adjustable rotation speed,range from 125 to 625 rpm
3,adjustable torque,range:6-52mNm

 
Apex locator and pulp tester
PT-1
Feature:
1,root canal apex finder and pulp vital measurement
2,wider color LCD screen,operation simple and friendly interface
3,fifth generation multi-frequency design for wet or dry accuracy,adjustment-free
4,accurate current-stabilized generate technology,exact result of pulp bitality testing
5,progreesive audio signal combined with on-screen graphics
6,rechargeable Li-ion battery and charger
7,charge/working status intelligent switch to avoid EMI
8,two woking mode
Techincal:
1,adaptor voltage:AC 100-240V,50-60Hz
2,battery:7.4V/1000mAh chargeable Li-ion battery
3,charge time:3 hours
4,display:color LCD screen,buzzer

 
PT-2 pulp tester
PT-2 pulp testor is designed for testing whether the teeth nerve is alive or dead.
Feature:
1,preset speed mode(high-mid-low speed)a gentle,pulsed stimulus begins to increase at a rate
2,specifically designed for patient's comfort,it the patient indicates perception,simply release the button,the stimulus stops immediately
,but the numbers remain frozen on the face for about 3 minutes
3,convernient to opearte:
maximum stimulus:0-80,between 0-40,the patient feels ache and anesthesia,alive teeth nerve;
between 40-80,with above-mentioned reaction,dead teeth nerve
4,the device will turn itself off in 3 minutes after operation to save enery
5,battery-operated,standard 9 volt batteries,extremely economical
6,fully guaranteed for 2 years
Technical:
1,Input:DC9.0V
2,OUTPUT:80V
3,CURRENT:90mA
4,VOLTAGE RANGE:DC 6.0-10.0V
5,SIZE:186*38*24mm

 
AL-I Apex locator
Feature:
1,adopt the III dural-frequency measuring technology,display with large LCD
2,measuring with not be effected by environment,no matter the root is dry or full of electrolyte(blood or normal saline),it can measure
precisely
3,manify the apex zone,display with 11 scales,precision can reach 0.1mm
4,number and scales display the detecting position synchronously
5,with sonar alarm when it's in narrow zone,and the sonar volume can be regulated
6,auto-check when starts up,calibrate the data previously,remain the operation precision
7,the narrow zone of apex can be regulated by the docotr if it's needed
8,low power consumption design,super long using time,power supplied by No.7 battery with 7 scales baterry indication
9,the accessories can be sterilized at high temperature,which can prevent the patients from cross infection
Technical:
1,voltage:DC7.5V
2,power consumption:<0.05w
3,static current:<10uA
4,displaying mode:LCD
5,running method:short time
6,classification:class II medical instrument classification index
7,thunder protection classification II type BF style mobile spatter-protect equipment(medical instrument classification index)

 
AL-2 apex locator
Feature:
1,measure the working length of the tooth by DC resistance,accurate result even in dry or wet ambient,doble display
Application:
measure the length of all kinds of pulpities,pulp necrosis,priapical priodonpitis,measure the length of transplanting or replaning tooth
Technical:
1,precision:0.1mm
2,detective precision:the tolerance of corresonding DC,resistance will be no mre than +/-10% when display above value
3,sonar alert:when the value is < or =0.5,there will be sonar alert
4,power range:AC 110-240V,DC8.5-9.2V
5,continous working time:non-stop working time will be no less than 2 hours when the battery is full
6,the accessories can be sterilized with high temperature,prevent the patients from cross infection

 
AL-3 apex locator
Feature:
measure the working length of the tooth by DC resistance,accurate result even on dry or wet ambient
Application:
measure the length of all kinds of pulpitis,pulp necrosis,priapical priodonpitis,measure the length of transplanting or replanting tooth,etc
Techincal:
1,detect range:0,0.5,1.25,2.0
2,detective precision:the tolerance of corresponding DC resistance will be no more than +/_10% when display the above value
3,sonar alert:when the value is <=0.5,there will be sonar alert
4,powder range:AC 110V/220V,DC8.5-9.2V
5,continous working time:non-stop working time will be no less than 2 hours when the battery is full

 
AL-4 apex locator
Features:
1.Stainless steel shelf design
2.High precision for measure reaches: 99%                                                                                       
3.Excellent work in dry & wet tooth environment                                                                                           4.USB2.0                                                                                                                                         5.Self-verifying technology
6.Digital multi-frequency internet technology
7.Colorful big LCD
8.The latest electronic technology  programs for apex locator technology
9.Big power & Rechargeable Li battery
10.Offer CD for USB set up

 
AL-5 Apex locator
Features:
1.Metal shelf -Special design
2.High precision for measure reaches: 99%                                                                                        
3.Excellent work in dry & wet tooth environment                                       
4.USB2.0                                                                                   
5.Self-verifying technology
6.Digital multi-frequency internet technology
7.Colorful big LCD
8.The latest electronic technology  programs for apex locator technology
9.Big power & Rechargeable Li battery
10.Offer CD for USB to setup on PC for
11.Easily change battery

 
AL-6 Apex locator   Black
Features:
1,Smart Appearance for design
2,Digital multi-frequency internet technology to ensure for the high precision reaches 99%
3,Excellent work in dry & wet tooth environment
4,Self-verifying technology.
5,Big pure screen
6,Customers offer 3pcs AA battery

 
teeth whitening accelerator
TW-1,stand type
TW-2,chair mount type
Feature:
1,new style structure and unique form,compact and elegance
2,double handles,drag type arm,multi-angle adjustment to make the operate more flexibly
3,unique semi-circular head design,both arches whitened at the same time
4,6pcs high power LED,fan-cooled
5,10s and 30s as a curing light,1-30minuts as a whitening accelerator
6,light intesities,suitable for more brands tooth whitening fel
7,LCD module screen shows all the information,all the operation is easy
8,chair side type is available,model TW-2
Technical:
1,Input power:100-240VAC,50-60Hz
2,Light resource:6pcs high power LED
3,wavelength:420-490nm
4,light intensity:6 intensities,maximum >2400mW/cm2
5,adjustable timer:10s,30s,1m,2m,5m,8m,10m,15m,20m,30m

 
LED curing light
LC-1
Feature:
1,high power LED,light power more than 1200mW/cm2
2,purely blue light,wavelength:420-480nm
3,high capacity rechargeable Li-ion battery,low battery detection
4,digital display,adjustable work time
5,over-temperature protection,light source detection
Application:
solidify all brands of resin materials
Technical:
1,charge(adaptor)working voltage:AC100-240V,50-60Hz
2,wavelength:420-480nm
3,light power:more than 1200nW/cm2
4,solidification time and depth:5s3mm

 
LED curing light
LC-2
Feature:
1,high power LED,light power more than 1200mW/cm2
2,purely blue light,wavelength:420-480nm
3,high capacity rechargeable Li-ion battery,low battery detection
4,digital display,adjustable work time
5,over-temperature protection
6,multiple working mode:high power,pulse,soft up
Application:
solidify all brands of resin materials
Technical:
1,charge(adaptor)working voltage:AC100-240V,50-60Hz
2,wavelength:420-480nm
3,light power:more than 1200nW/cm2
4,solidification time and depth:5s3mm

 
LED curing light
LC-3
Feature:
1,high power LED,purely dental blue light
2,digital display,adjustable work time
3,multiple working modules:high power,pulse,soft up
4,high capacity rechargeable lI-ion battery
5,low battery detection
6,low-power,long standby time
7,over-temperature protection
Technical:
1,adaptor working voltage:AC100-240V,50-60Hz
2,wavelength:420-480nm
3,light power:more than 1200nW/cm2
4,solidification time and depth:5s3mm

 
Dental blue LED curing light
LC-4
Feature:
1,high power LED from USA,professiomal dental spectrum,solidification depth can reach 3mm within 5 working seconds
2,streamline design,LCD display
3,multiple working modules:high power,lower power,gradually strong 1,gradually strong 2
4,sodilifying time:5-40s,can be adjustable
5,Li-ion battery with big capacity,fix charger or charge directly is optional
6,wireless and corded are compatible in the unit
7,dormancy and automatic memory function are available
8,built-in high sensitive LED light measure system
Technical:
1,charger(adaptor)working voltage:AC100-240V,50-60Hz
2,wavelength:450-480nm
3,light power:more than 1200mw/cm2
4,solidification time and depth:5s3mm

 
LED curing light
LC-5 wireless
LED curing light
LC-5 corded style
Feature:
1,original imported big power LED from USA
2,high articulation optical fiber
3,three working modes:strong,gradually strong,flashing
4,optical working time:10sec,15sec,20sec
5,automatic inactive,automatic power off
6,low battery alert
7,super capacity battery
8,wireless and corded style
Application:
solidify and brands of resin materials
Technical:
1,charger(adaptor)working voltage:AC100-240V,50-60Hz
2,wavelength:450-480nm
3,light power:more than 1200mw/cm2
4,solidification time and depth:5s3mm

 
LED curing light
LC-6 wireless
LED curing light
LC-6 corded style
Feature:
1,original imported big power LED from USA
2,high articulation optical fiber
3,three working modes:strong,gradually strong,flashing
4,optical working time:10sec,15sec,20sec
5,automatic inactive,automatic power off
6,low battery alert
7,super capacity battery
8,wireless and corded style
Application:
solidify and brands of resin materials
Technical:
1,charger(adaptor)working voltage:AC100-240V,50-60Hz
2,wavelength:450-480nm
3,light power:more than 1200mw/cm2
4,solidification time and depth:5s3mm

 
LED curing light
LC-7 wireless
LED curing light
LC-7 corded style
Feature:
1,original imported big power LED from USA
2,high articulation optical fiber
3,three working modes:strong,gradually strong,flashing
4,optical working time:10sec,15sec,20sec
5,automatic inactive,automatic power off
6,low battery alert
7,super capacity battery
8,wireless and corded style
Application:
solidify and brands of resin materials
Technical:
1,charger(adaptor)working voltage:AC100-240V,50-60Hz
2,wavelength:450-480nm
3,light power:more than 1200mw/cm2
4,solidification time and depth:5s3mm

 
LED curing light
LC-8 wireless
LED curing light
LC-8 corded style
Feature:
1,high power LED,purely dental blue ligh
2,high articulation optical fiber
3,digital display,clear and intuitive operation
4,three working modes:strong,gradually strong,flashing
5,optional working time:5sec,10sec,15sec,20sec
6,automatic inactive,automatic power off
7,low battery detection
8,super capacity batter
9,membrance pushbutton,softfeel
Application:
solify any brands of resin materials
Technical:
1,charger(adaptor)working voltage:AC100-240V,50-60Hz
2,wavelength:450-480nm
3,light power:more than 1500mw/cm2
4,solidification time and depth:5s3mm

 
LED curing light
LC-9(WIRELESS)
LED curing light
LC-9(corded style)
LC-10 LED curing light
1,Different design for appearance better for operations
2,Light intensity:1000mw/cm2                 
No fan, No wire. Work conveniently
3,The latest software for the technology based on the old ones
4,Working time: 20 seconds. Every 5 seconds have one sound
5,Longevity for the LED
6,Big power & Rechargeable Li battery    
7,With Stand to make it standing                
  8, 2 Colors: Silver & White

 
amalgamator
AM-1
Feature:
1,this kind of amalgamator is controlled by a microprocessor,ensures a precise,controlled,consistent mix;
2,with wide oscillating range and mixing frequency,setting time from 1 to 99s
3,it's revolve according to "8" model;
4,for mercury-based fillings,trust the performance of AM-1;it provided clinical perfection you need with easy of use;
5,for safe operation,this machine deactivates when the front cover is open to access the capsule;
6,its ergonomic design is easy to use,stable,extremely quiet and esay to clean or maintain;
7,controlled,consistent mix;
8,noiseless,stable operation
9,electrical safey standards met
10,ergonomic design
11,easy maintenace
Specifications:
1,voltage 220V/50HZ or 110V/60HZ
2,absorbed power 200W
3,fuse 2A
4,mixing frequency 4350r/min
5,amplitude 25mm
6,functioning intermittent
7,programmable mixing time 1-99sec
8,dimensions:25x21x13cm
9,N.W.:3.5kgs

 
DB-4820 digital ultrasonic cleaner
UC-1
FEATURE:
1,lengthened tank
2,radiator fan
3,stronger transducer
4,wet-proof PCB
5,5 cycles digital timer
6,three separable wires
7,heater
8,insustry IC
9,circuit protector
10,strong plastic housing
Technical:
1,ultrasonic frequency:42,000Hz
2,tank material:stainless steel SUS304
3,tank capacity:2500ml
4,timer:digital timer with 5 cycles(180/280/380/480/90seconds)
5,power supply:AC100~120V,50/60Hz;AC220~240V,50/60Hz
6,power:160W(AC100~120V;170W(AC200~240V)
7,MEAS.:26x26.5x13.5mm
N.W.:2.5kgs

 
digital ultrasonic cleaner
UC-2
Features:
1.high power transducer for superior cleaning results
2,large tank capacity for professional cleaning
3,isolated-circuit design,keep water away for enhaced safety
4,fist ultrasonic cleaner to introduce cooling fan for prolonged operation
Functions:
1,professional cleaning
2,great cleaning device for scientific labs,medical and dental clinics,electronics workshops hobbyists
Specifications:
1,ultrasonic frequency:42,000Hz
2,tank material:stainless steel SUS303
3,tank capacity:1375ml(2.4pint)
4,quiet,solid states circurity
5,timer:5 cycles with digital time display
5,power supply:AC100~120V,60Hz;AC220~240V,50Hz
6,power:60W(AC100~120V;170W(AC200~240V)
7,MEAS.:23x18x16mm
8,N.W.:1.75kgs

 
DB-800 handpiece lubricating device
HL-1
working procedures:
1,remove scraps:
in the body of high speed handpiece,there will have counter-pressure vacuum to remove the particles on the pipe and bearing surface
2,solution clean:
solution will flow along with the air to clean the dirt in the counter-pressure gap
3,blow:
blow to dry the remnant soluction in the body of the handpiece
4,lubricate:
lubriction will lubricate into the counter-pressure gap universally
5,blow:
blow off the leftover lubrication,let the lubrication membane cover the balls and bearing
6,finish
now,the bearing,the ball and the channel are clean and lubricated,it can be sealed and sterilized

 
sander gun
SG-1
SG-2
SG-3
Artful shape,easy hold
rotate nozzle,clean thoroughly
3-point spray,better clean result
multi-colorful option

 
intraoral camera
IC-1
IC-2
IC-3
Features:
1,resolution:680,000pixels,sensor:1/4inch color CCD
2,lens:0.02inch pin lens
3,adaptor input:110-220V,50-60Hz;output:5V,2A
4,1/4 picture to devide up and change
5,memory:27*4pictures
6,VGA &USB2.0signal output