Talking about the method of storing harvesters

The use of the combine harvester for a short period of time, long time for parking, in order to extend the service life, reduce the failure of the operation, after the end of the summer harvest operations, the harvester should be properly kept in accordance with the following nine points.

1. Select: Wash the soil inside and outside the harvester with water, clean the wrapped grass and other debris, remove the chain and soak it with diesel oil until the oil sludge is brushed, then soak it with oil for 5 to 10 minutes, remove the oil, and apply grease. Wrap in kraft paper or plastic bag in a dry place.

2, storage: thoroughly clean the machine into the hangar, the inorganic library to be covered with rain, the sun's simple shed, with plastic bags of diesel, oil filling port, air filter, exhaust pipe bandage Enter with dust-proof soil.

3, put the net: After the engine is off, the oil of the oil pan is released hot, and the diesel of the diesel engine is released. After the water temperature drops, the cooling water components such as the water tank and the body are opened and the cooling water is discharged.

4. Dismantling: Remove all the belts, wipe them, and inspect them for damage. Record the position mark of the belt and store the talcum powder hanging in the cool and ventilated place inside the hangar. Remove the main electrical equipment such as generators and headlights and keep them properly. Remove the battery and store it indoors to charge it. Winter attention to thermal insulation.

5. Inspection: Check worn and deformed parts, and focus on checking the parts that have malfunctioned in the operation and repair and replace them in time.

6, anti-corrosion: Harvester often sun, rain, friction, collision, in order to prevent corrosion, paint or spray paint in a timely manner. Apply anti-corrosion oil or butter to adjustment bolts and safety clutch claws on the cutter.

7. Relax: Relax the springs of the parts so that they are not compressed. All parts of the hydraulic cylinder should be in the inoperative position.

8. Lubrication: The requirement of the Lubrication of the harvester in the plant is to thoroughly lubricate the components.

9, custody: harvester parking place to do a good job of fire protection measures. Monthly engine cylinder, to add a little oil, at least to crank the crank 1 to 2 times, the operation of the hydraulic handle dozens of times.

Sweetener

D-tagatose is a rare natural monosaccharide, which is the ketose form of galactose and the epimer of fructose. The sweet characteristic is similar to sucrose, and the heat produced is only one third of sucrose, so it is called low calorie sweetener. Tagatose has excellent nutritional characteristics such as low caloric value, zero glycemic index, blood glucose passivation, caries free, prebiotic effect and antioxidant activity. Tagatose has been approved by FDA as a pharmaceutical excipient for throat moistening tablets, over-the-counter diabetes cough syrup, chewable antibiotic tablets, non steroidal anti-inflammatory drugs and pediatric drugs. FDA Approves tagatose to replace sucrose and other sweeteners in toothpaste, mouthwash and cosmetics.

D-Tagatose Powder,Aspartame Powder,Erythritol Powder,Monk Fruit Extract

Xi'an Tian Guangyuan Biotech Co., Ltd. , https://www.tgybiotech.com