Poor resistance Seoul Changzhou drying equipment Company Limited      1. The vacuum head of the conventional double-cone dryer is single-headed and does not rotate with the tank. Because the vacuuming head is generally heavier and the vacuum tube is not concentric with the rotating shaft during installation, the vacuum tube and the tank self-arm seat are often caused. The sealing packing wears too fast, causing the gap to be too large, a small amount of material enters the tank self-arm seat, and is in contact with the carbon steel part. If the material is contaminated by iron ions, it will be vacuumed into the tank when the next batch of materials is dried. The scrapping of batch materials has extremely serious consequences. At the same time, the material entering the tank from the arm seat will also cause damage to the vacuum tube and damage to the pipe end sealing member (rotary joint or machine seal). Therefore, my engineering and technical personnel solved this technical difficulty by adopting a new structure for this shortcoming. The advanced technology of the vacuum tube with vacuum head and the synchronous rotation of the tank body is designed, which avoids the disadvantage that the equipment of other manufacturers is contaminated by residual materials or seal ring wear materials due to the wear of the cylinder and the vacuum tube. After being used by many companies, the excellent results have been widely praised. It is considered to be an effective measure for the current domestic solution to this problem. Changzhou Pu Nair Drying Equipment Co., Ltd. 4-Layer KN95 Protective Face Mask,Folding KN95 Face Mask,Dust Protect Kn95 Face Mask,3D KN95 Face Cover Dongguan Keyutai Mask Co., Ltd. , https://www.maskkytai.com company name: Contact: Li Xiaofeng: Mobile phone: : 88908753 88910379 Fax: Address: Jiaoxi Industrial Park, Zhenglu Town, Changzhou City
SZG series double cone rotary vacuum dryer technical description
2 , both ends of the cylinder are first sealed with zui's advanced rotary joints, which has changed the previous phenomenon that the packing seal is easy to wear and leaks vacuum and leaks (using Johnson Technology of the United States).
3. The installation height of the liftable drive motor. Since the motor is designed with the motor movable bracket, it can ensure that the chain tension of the chain is adjusted by adjusting the motor movable bracket after the chain is deformed and loosened for a long time. When the chain is loose, the phenomenon that the tank body slides during movement and the shaft has a large torque is likely to damage the equipment.
4. The equipment adopts the method of frequency conversion speed regulation to make the equipment start smoothly, the motor current is not too large, and the equipment life is prolonged. The manhole cover and the barrel are sealed with a temperature-resistant and pressure-resistant silicone rubber material, and the discharge port is a vacuum butterfly valve, which not only ensures the vacuum inside the tank, but also regulates the flow rate during discharge.